Black Shark Magnetic Cooler 6 Pro - 35W Phone Cooler with Smart Display
Couldn't load pickup availability
35W of Cooling and a Colour Screen on the Back of Your Phone
The Magnetic Cooler 6 Pro is the serious end of phone cooling. A 40 x 40mm custom TEC chip drives 35W of cooling power, capable of pulling surface temperature down by as much as 50°C and reaching -25°C at the plate itself. That is enough headroom to hold sustained frame rates in demanding games rather than watching your phone throttle twenty minutes in.
The upgraded ICECOLD 2.0 architecture is what makes that possible in a body this thin — cold-forged 2.0 construction with 40% more fins and a 26% larger heat dissipation area, while shedding 8g of weight. Noise stays at 39dB or below despite the extra output.
The headline feature is a 0.71-inch full-colour HD display on the back, showing real-time power draw, device temperature, cooling level and fan speed at a glance — and it accepts custom wallpaper if you would rather have your own image there. Sixteen addressable RGB LEDs handle the lighting, and everything is configurable through Black Shark's app. Magnetic attachment works with MagSafe-style phones directly, and the included magnetic ring plate adds support for non-magnetic devices, tablets and handhelds.
One practical note: to reach the full 35W you will want a 40W or higher wall charger, which is not included in the box.
Key Features
- 35W cooling power: Up to 50°C temperature drop, reaching as low as -25°C.
- 0.71" full-colour HD display: Live power, temperature, cooling level and fan speed, with custom wallpaper support.
- ICECOLD 2.0 architecture: 40% more fins, 26% larger dissipation area, 8g lighter.
- 40 x 40mm custom TEC chip: Large semiconductor plate for rapid heat transfer.
- 16 addressable RGB LEDs: Individually controllable lighting effects.
- Quiet operation: 39dB or lower even at full output.
- App control: Cooling modes and visuals configurable from your phone.
- Wide compatibility: Magnetic and non-magnetic devices via the included ring plate.
- Works across devices: Android, iPhone, iPad, Switch, laptops and more.
- 1 year warranty
Specifications
- Cooling power: 35W
- Temperature drop: Up to 50°C (122°F)
- Minimum plate temperature: -25°C (-13°F)
- Cooling chip: 40 x 40mm custom TEC
- Cooling system: ICECOLD 2.0, cold-forged 2.0 ultra-thin architecture
- Display: 0.71-inch full-colour HD, custom wallpaper supported
- Lighting: 16 addressable RGB LEDs
- Noise level: 39dB or lower
- Attachment: Magnetic, with magnetic ring plate for non-magnetic devices
- Power requirement: 40W+ wall charger recommended (not included)
- Compatibility: Android, iPhone, iPad, Nintendo Switch, laptops
- In the box: Cooler, USB-C to USB-C cable, magnetic ring plate, user manual
- Warranty: 1 year
Black Shark
Black Shark products at Gadget LB are 100% original and covered by official warranty. We are a trusted electronics retailer in Lebanon, offering the latest Black Shark releases at the best prices.